UQK-61 type cable ball float liquid level controller

• 

UQK - 61 series ball float liquid level apparatus is used within the floating ball hidden micro swit…

An overview,

UQK - 61 series ball float liquid level apparatus is used within the floating ball hidden micro switch of liquid level switch, for there were external machinery, especially suitable for the liquid containing solid, semi-solid state floater: the following channel processing, factory waste water pool with water and other liquid tank liquid level automatic alarm and control, when the liquid when you arrive at a given location, controller flip quickly, make the micro switch signal.Decide the scope of action can be free at the scene.

Second, the main technical indicators

Outside size: 88 x 172, junction box, the largest diameter floating ball Φ Φ 205, 142, installation high flange size: 170, central circle diameter of bolt hole Φ 4 hole - Φ 18;The flange diameter: Φ 205
Output signals: micro switch single pole double throw contact 15 a 1/2 HP 250 vac output;0.6 A, 125 VDC.0.3 A 250 VDC
Contact life close: 5 x 10
Medium temperature: - 10 ℃ ~ 55 ℃, IE level controller for - 10 ℃ ~ + 80 ℃
The adjusting range: 0.3 meters to 0.4 meters (six meters, 13 meters, 20 meters, for IE level gauge)
Main components of material: float: ABS plastic (stainless steel);Weight: carbon steel or cast iron outsourcing plastic;
Conductor: three core rubber set soft cable (oil resistant styrene butadiene rubber, high flexible high temperature resistant silicone rubber cable - 10 ℃ ~ 170 ℃)

Three, heavy hammer device

1, will float switch wire line on a heavier under the hammer at the center of the concave round hole through, gently push heavy hammer, the embedded in the round hole at the top of the plastic ring fall off because of the thrust of the wire.(if necessary, also can use a screwdriver to the plastic ring removed), and then fall off the plastic ring set of fixed position on the cable you think heavy hammer, to set the water level of the position.

2, pull gently push heavy hammer cable, until the heavy hammer center buckle plastic ring.* * weight as long as gently slip is not in the plastic ring, plastic ring if there are any damage or loss, the diameter can be used with the bare copper wire buckle into the cable instead.Please pull the cable directly to the control box, avoid using the middle joint, if the last joint, absolutely not the cable connector into the water.

Four, the main features

1, outside have no moving parts, won't produce floating debris stuck fault.
2, flexible control range and the scene is adjustable.
3, the output contact is normally closed normally open type conversion convenient user use.
4, floating ball, junction box, hammer type (water, sewage).