Steam clamp type magnetic flip gauge

• 

The liquid level of the steam clamp type magnetic flip plate is installed by the main body of the ma…

The liquid level of the steam clamp type magnetic flip plate is installed by the main body of the main body with an insulated jacket and is formed into the steam and other heat media. You can keep the fluid flow in the main body. Therefore, the liquid level measurement and control of the liquid can be applied. For low boiling liquid, it can be used in cold water such as cold water to keep the liquid level stable. Make the instrument accurately indicate the position of the measured liquid.

The main parameters of the liquid level of the steam clamp

Measuring range: 500 ~ 8000mm

Accuracy: plus or minus 10mm (insulation)

Job stress: less than 2.5 MPa (common type)

Less than or equal to 10.0 MPa (high pressure type)

Less than 2.5 MPa

To 40 ℃ to 50 ℃ ambient temperature

The liquid level of the steam clamp type magnetic flip plate: 0.45 ~ 2g/cm3

Density difference: greater than 0.15 g/cm3 (measurement boundary)

Low medium temperature: 80 ℃ ~ + 450 ℃

Power: 25 w/m, 35 w/m

Maintain highest temperature: 65 ℃

The viscosity of the medium: less than 0.4 Pa. S, which can be easily crystallized when the medium or temperature is low, which can be used according to the user's requirement.

The ambient vibration: the frequency is less than 25HZ, the amplitude is less than 0.5 mm

Interface flange: adopted by the ministry of chemical engineering in 1997, the standard of HG20592 ~ 20635-97.

If users need to adopt other standards (such as GB, ANSI, DIN, etc.), they can be designed according to the user's needs.

The company has developed various display magnetic plates according to different users and operating conditions. Suitable for use in dust, oil, and high humidity. It is suitable for use in acid and alkaline environment. There are aluminum alloy plates used in high temperature environment.

The measuring cylinder materials can be selected 316L, 304, PVC, PP, 304 linings or ordinary stainless steel according to the user's use of pressure, temperature, and corrosive factors.