High temperature type magnetic flip gauge
High temperature magnetic flap for broadening the UHZ series magnetic level gauge is my company the …
Description：
High temperature magnetic flap for broadening the UHZ series magnetic level gauge is my company the use of the liquid level meter, turning more broadly meet the requirements of electric power, heat supply, gas supply and other industries, adopt unique cooling way, effectively control the working temperature of the medium instrument, to avoid the magnetic components under the condition of high temperature demagnetization, ensure reliable work, measurable high temperature 450 ℃, a leading position among the same industry at home.
The high temperature type magnetic liquid level gauge is suitable for high temperature and high pressure liquid container turning, the position of the measurement and control.Clearly indicates that the height of liquid level, direct display striking, indicator and completely isolated storage tank, the use of safe, reasonable design, simple structure, convenient installation and reliable, stable performance, long service life, low maintenance cost, easy installation and maintenance, etc.
Users can according to the requirements of the project, cooperate with remote transmitter use, can be realized on the digital display, as well as the standard of 4 ~ 20 ma output far eastone electrical signals, to match the recording instrument, or the needs of the industrial process control.Can also be used with magnetic control switch or close to switch, etc, the liquid level monitoring alarm and control into the liquid equipment.
High temperature type magnetic level gauge turning technology parameters
Measuring range: 200...~ 15000 ㎜ (more than 6000 mm or transportation conditions are not allowed to exceed the length of the liquid level meter can be procurement section)
Display precision: plus or minus 10 mm;
Pressure of work: 6.3, 10.0, 16.0, 10.0 MPa;
Medium temperature: - 20 ℃ ~ 450 ℃;
Medium density: p. 0.5 g/cm3;
Medium density difference: p. 0.15 g/cm3 (measuring the position)
Medium viscosity: 0.4 Pa s. or less;
Process connections: 3/4 "/ 25 PN1.0 (executive standard HG20592 ~ 20635-97), if you need other standard can be made according to customer's requirement.
Liquid material: 316 ss, 316 l, and so on
(according to the chemical properties and the use of medium temperature pressure selection).
Float material: 316 ss, 316 l, titanium, etc.
High temperature magnetic level gauge turning ordering options table
Level gauge type | 4-20 ma on local display output, the lower limit alarm (switch forms: normally open or normally closed, keep type, explosion-proof type) 4-20 ma output and the upper and the lower limit alarm HART protocol RS485 bus |
Working temperature | - 20 ~ 450 ℃ ℃ (according to customer's requirement) |
Measuring range | L = ㎜ (according to customer requirements: 200.... ~ 200 ㎜) |
Measuring the dielectric | According to customer's requirement () |
Medium density | G/cm3 (according to the customers: p. 0.5 g/cm3) |
Design pressure | 6.3 Mpa to 10.0 Mpa or less acuities were 25 Mpa or less other Mpa |
The actual pressure | 6.3 Mpa to 10.0 Mpa or less acuities were 25 Mpa or less other Mpa |
Process connection | Other: 3/4 "PN1.0 DN25 PN1.0 DNPN (according to customer's requirement) |
Other requirements | Explosion-proof (flameproof) other |
Find out more about the products, technologies and solutions you need. Please leave us a message
Browse：
