Lining of four fluorine anticorrosive magnetic plate liquidometer

• 

Lining PTFE anti-corrosion magnetic level gauge stainless steel lined with PTFE anti-corrosion type …

Lining PTFE anti-corrosion magnetic level gauge stainless steel lined with PTFE anti-corrosion type magnetic flap turning liquid level meter adopts advanced stainless steel lining of polytetrafluoroethylene (PTFE) material inside the oven whole line, replace the traditional stretch flanging process, raw materials into the oven overall even four fluorine lining process than the traditional process more naisuanjian corrosion, fully sealed zero leakage, measurement without blind spots.

Polytetrafluoroethylene is commonly known as teflon, plastic king, strong acid, strong alkali and other corrosive liquid and organic solution. The liquid level of the stainless steel inner liner teflon is divided into four fluorine and (bottom loading) of the liquid level of the side, which is lined with four fluorine and four fluorine

I plant the production of stainless steel lining ptfe anti-corrosion magnetic flap the level structure and reliable, long life, regardless of liquid corrosion and air corrosion or high temperature and high pressure can be stable measurement using for a long time, for some consistency, corrosive liquid flow velocity is slow, our factory also specially designed research and development of large diameter tube liquid level meter, prevent high flow, measuring faster, more accurate.

Side mounted/top mounted anti-corrosion magnetic flap level gauge (PTFE, PTFE) is suitable for the corrosive medium and high working temperature and liquid level measurement, adopts advanced stainless steel lined with PTFE raw materials into the furnace, even the whole line, structure and reliable, long service life. It is the optimal choice of liquid level measurement of strong corrosive medium such as hydrofluoric acid. Users can according to the requirements of the project, cooperate with remote transmitter use, can be realized on the digital display, as well as the standard of 4 ~ 20 ma output far eastone electrical signals, to match the recording instrument, or the needs of the industrial process control. Also can cooperate with magnetic control switch or close switch and so on, to the liquid level monitoring alarm or to the hydraulic fluid equipment to control

Note: if the corrosive and does not meet the above condition, but need anti-corrosion, then general weak corrosive liquid to choose 304 stainless steel or 316 l stainless steel.

The parameters of the 304PTFE polyfluoroethylene anti-corrosion liquid level meter, which are lined with four fluorine antiseptic and anti-corrosive magnetic plate

Measuring range: 300 ~ 5000 ㎜ (more than 5000 mm can be made special)

Display accuracy: plus or minus 10mm;

Work pressure: stainless steel liner PTFE: less than 2.5 MPa;

Stainless steel lining PP: less than 1.0 Mpa

(our highest pressure can be 25Mpa, see high temperature and high pressure instrument.)

Medium temperature: stainless steel lined with PTFE: - 20 ~ 200 ℃;

Stainless steel lined with PP: - 20 ~ 90 ℃

Media density: greater than 0.5 g/cm3;

Dielectric density difference: greater than 0.15 g/cm3 (measurement boundary)

Medium viscosity: less than or equal to 0.4 Pa.

Process connection: dn20/25 PN1.0 (execution standard HG20592 ~ 20635-97), as required by other standards to be made by customers.

Receiving liquid material: PTFE, PP; (the chemical properties of the medium and the use of temperature pressure);

Float material: PTFE, PP, stainless steel lining PTFE etc.